AutoCAD and 3D Drawings for Standard Models

Special Note: The stock CAD drawings shown here are the copyrighted property of Campbellsville Industries, Inc. and are for the sole use of architect's and designer's to incorporate into their elevations and specifications in specifying a Campbellsville steeple or cupola. Any unauthorized use of these drawings for any purpose other than this is expressly prohibited. The user agrees to these terms upon downloading these files. 

Instructions: You must have AutoCAD software to open these files. If you are not a Design Professional with this software, you may view our standard steeple designs by clicking this link. To download an AutoCAD file below, "right click" on the appropriate file and select "Save Target As" from the menu. Then save the selected file to a folder on your computer. If you need assistance, a budget estimate, wind loading, or anchor details--feel free to contact us for help. We can also assist you with editing the specification to make it project specific. All specifications are general in nature and need to be edited to your requirements. Please remove any finishes and/or metals that are not required on your project. For example, if you desire a steeple clad in .032" aluminum with a baked-on Kynar finish, please remove all references to copper, lead-coated copper, and zinc material options. Should you desire the spire to be clad in copper, state that clearly in the specification. If engineering and stamp will be required on the final shop drawings by an engineer licensed in your state, this is available at added cost, but needs to be listed in the specification as being required of the steeple/cupola manufacturer. 

"S" Series Steeple Designs (Simple Spires):

"C" Series Steeple Designs (Colonial Designs):

Cornice:

BACK

Copyright © 1980 Campbellsville Industries, Inc. All designs are the copyrighted property of Campbellsville Industries and are for the use of Design Professionals only, or by written permission by Campbellsville Industries. All rights reserved.